← All researchShear flows & turbulence · 2026

Flow separation over protrusions

How the length and rear-face angle of a surface-mounted protrusion shape separation and turbulence.

Under reviewarXiv preprint
Reverse-flow regions over three trapezoidal protrusions
Reverse-flow region (U < 0) over the shortest protrusions with rear-face angles of 90°, 45° and 30° (top to bottom). From the arXiv preprint (2026).

Overview

Surface-mounted protrusions trip separation on walls, ducts and vehicles. The flow behind them depends on how the separated flow reaches the trailing edge, and that depends on the protrusion shape.

Experimental approach

Stereoscopic PIV in a recirculating water tunnel over twelve trapezoidal protrusions, with upper-surface length-to-height ratios of 1 to 4 and rear-face angles of 30°, 45° and 90°, at a height-based Reynolds number of about 50,000 and an incoming boundary layer comparable in thickness to the protrusion height.

Key result

For the two shorter protrusions, one connected reverse-flow region runs over the upper surface into the wake. For the two longer ones, the flow reattaches on the upper surface and the two regions separate. Length sets this topology and the turbulence levels, while the rear-face angle matters most close to the surface.

← Back to researchBrowse publications →