Experimental methods

Methods and facilities

The measurement techniques I use and the facilities I have designed, built or established. Most of my research depends on infrastructure I helped create.

Measurement techniques

Flow diagnostics

  • Tomographic PIV and PTV
  • Stereo and time-resolved PIV
  • Refractive-index matching
  • Schlieren imaging
  • Laser-sheet interface scanning
  • Single-camera 3D PIV

Analysis

  • Boundary-aware reconstruction (LE-DM)
  • Pressure and loads from PIV
  • Coherent structures and FTLE
  • Turbulence statistics (uPrime)

Instrumentation

  • Facility design and build
  • Multi-instrument synchronization
  • LabVIEW and Arduino control
  • Motorized traverses

Facilities I built

Technion · co-established with Asst. Prof. Omri Ram

Transient Fluid Mechanics Laboratory

Developed the laboratory from a temporary space into a fully equipped research facility with capabilities for advanced flow measurements, multiphase experiments and shock-driven flows.

Rendering of a long shock tube on support stands
Layout of the shock tube. From Gichon, Jose et al., J. Fluid Mech. (2024).
Technion · designed, built and automated

Shock tube

A 7 m shock tube, including the electronics, sensor integration, multi-instrument synchronization, motorized traversal and LabVIEW/Arduino control. Its control system remains the core of the facility, which now runs with new test sections.

Used in: shock-wave propagation

Rendering of a closed-loop water tunnel
Closed-loop water-tunnel facility. From Zuckerman, Jose, Levi and Ram, arXiv (2026).
Technion · specified, instrumented and calibrated

Recirculating water tunnel

Specified the flow quality, instrumented and calibrated the laboratory’s large recirculating water tunnel, establishing its operating envelope.

Used in: flow separation over protrusions

Four high-speed cameras around a tall transparent tank
Tomographic PTV setup around the octagonal tank. From Jose, Ben-Harosh and Ram, Int. J. Multiphase Flow (2026).
Technion · established

Refractive-index-matched tomographic PTV

Time-resolved, four-camera tomographic particle tracking with refractive-index matching, for freely moving and optically hidden bodies. It is the measurement platform behind LE-DM.

Used in: freely rising spheres, boundary-aware reconstruction

3D surface plot of a scanned liquid surface around a particle
Raw scan around a flat hexagonal particle (displacement magnified 10 times). From Einhorn, Jose, Zigelman et al., J. Fluid Mech. (2025).
Technion · designed and built

Liquid–gas interface scanning

A fluorescence-based laser-sheet scanning system with stereo imaging that maps the shape of a liquid–gas interface with 0.1 mm precision.

Used in: interface deformation around particles

Five cameras around a laser-illuminated tank, one fitted with a phase-mask lens
PET-PIV camera (C0) integrated with the four tomographic cameras (C1–C4). From Xiao, Jose et al., arXiv (2026).
Technion · built

Tomographic and PSF-engineered imaging

A five-camera system combining tomographic and PSF-engineered imaging, used to validate a single-camera 3D PIV method based on wavefront shaping and deep learning.

Used in: single-camera 3D PIV

Technion · contributed

Boiling facilities

Contributed to the design of single- and multi-bubble boiling facilities. Currently involved in confined-cell experiments on boiling and bubble-driven convection, using digital holography to track bubble growth and evolution.

Diagrams of an airfoil test section with cameras, laser sheet and drive train
Pitching-airfoil test section and stereo PIV arrangement in the tunnel. From Jose, Lu, Agarwal and Katz, AIAA J. (2026).
Johns Hopkins University · designed and built

Refractive-index-matched water tunnel

A large refractive-index-matched recirculating water tunnel using more than 2,000 L of sodium iodide solution, including the mixing plant, storage, pressure and vacuum control, an inline cyclone bubble separator and hydraulic calibration.

Used in: dynamic stall